2,2tonton sivuttaishaarukkatrukin kiinnittimet

Koti / Kaikki liitteet / 2,2tonton sivuttaishaarukkatrukin kiinnittimet
Forklift fork clamps
Forklift fork clamps

Tuotteen Kuvaus


2.2ton Non-sideshifting Fork Clamps for forklift

Sovellukset:

Soveltuu lastin puristamiseen ja myös kuormalavojen käsittelyyn.

Ominaisuudet:

Vahva teräsrakenne täyttää jatkuvan toiminnan vaatimukset korkealla hyötysuhteella.
E-Style-Slot-runko tarjoaa erinomaisen vakauden ja pidemmän käyttöiän.
Kohtuullinen muotoilu ja luotettavat maailmanlaatua edustavat hydrauliset komponentit.

Tuotesarja:
Non-sivusiirrolla
sivusiirrolla
pyörivä

Huomautus:
Kuorma-autossa tarvitaan kaksi ylimääräistä hydraulipiiriä kiinnitys- ja kääntötoimintoihin.
Erityinen kosketuslevy on saatavana pyynnöstä.
Kaikki yllä luetellut tuotteet ovat vakiomalleja, räätälöityjä tuotteita voidaan toimittaa yksityiskohtaisten vaatimusten mukaisesti.

2.5-3T haarukan kiinnittimille-NonSideshifting, palaa "trukkien kiinnityssivulle" napsauttamalla "Haarukan kiinnitin ilman sivusiirtoa (2,5-3T)" löytääksesi oikea malli, jota tarvitset.

Tai voit vain ottaa meihin yhteyttä tuotteesi vaatimuksilla, esittelemme mallin vastaamaan vaatimuksiasi. Kiitos näkemyksestänne.

Fork Clamps Drawing
Fork Clamps Drawing

määrittely

Kapasiteetti @ Kuormituskeskus

(Kg @ mm)

ModesAsennusluokkaAvausalue

(Mm)

Käden pituus

(Mm)

Kehyksen leveys

(Mm)

Korkeus

(Mm)

Paino

(Kg)

Tehokas paksuus

(Mm)

Vaakasuora painopiste

(Mm)

1100@600CFS15D-001AII435-1555915865620250175163
1100@600CFS15D-002AII435-15551065865620259175191
1100@600CFS15D-003AII435-15551220865620268175226
1600@600CFS20D-004AII410-1660915940620295180168
1600@600CFS20D-005A11410-16601065940620306180198
1600@600CFS20D-006AII410-16601220940620328180231
2300@600CFS30D-001AII465-18109151015915401208173
2300@600CFS30D-001BIII465-18109151015915422216168
2300@600CFS30D-002AII465-181010651015915420208203
2300@600CFS30D-002BIII465-181010651015915438216201
2300@600CFS30D-003AII465-181012201015915435208226
2300@600CFS30D-003BIII465-1810122010159154216201

 

Huomautus:

  • Hanki trukin ja lisälaitteiden todellinen kapasiteetti trukin valmistajalta.
  • Kaksi erillistä öljypiiriä tarvitaan trukkiin.
  • Aukkovarsi voidaan lisätä haarukan kiinnittimiin tarpeen mukaan
  • Tarjoa erilainen haarukan kysyntä tarpeen mukaan
  • Please contact the sales from huamai.

 

Hydraulinen virtaus ja paine

 

MalliMin.Hydraulinen virtaus (L / min)Rec. Hydraulinen virtaus (L / min)Suurin hydrauliikkavirta (L / min)Min. Hydraulinen paine (bar)Max. Hydraulinen paine (bar)
CFS15D15252535160
CFS20D15252535160
CFS30D15404035160

 

Options

Haarukan koot

Saatavana erilaisia kiinnitysluokkia

Mukautetut avausalueet

MEDIA GALLERY

Haarukkapihdit
Haarukkapihdit

Package 

Forklift Fork Clamps Package
Forklift Fork Clamps Package

Reading Instruction

  1. Product Model

Huamai model no. Consists of letters and numbers connected by “-”, the details as below:

RCF20F-002B

Name: Based on the product's functional and structural classification, an abbreviated product code is given

Example: RCF - Fixed short arm paper roll clamp

Capacity: Capacity= Code+00 (KGS)

Example: 20-2000 KGS

Series: The generations of the products

Example: D - The fourth generation

Clamp arm size: It is used to distinguish the same capacity, series and types of products with different structure sizes.

Example: 002 - The maximum diameter of paper roll is 1300mm

Mounting Class: The mounting class of the product

Example: B - III

  1. Matching with Forklift

Please pay attention to the flow and pressure volume requirements for the attachments. Don’t exceed its maximum. Any special requirements such as pressure setting etc, other auxiliary devices may need to be added. Please contact our representatives for details.

  1. Fitting Version

Fitting size is as per GB standard, with face seal type (M18 x 1.5). For special type please contact Huamai sales.

  1. kapasiteetti

The load capacity is only a parameter to measure the performance of structure, and the actual comprehensive carrying capacity also depends on the carrying cargo, working conditions and the capacity of forklift. Accurate forklift truck with comprehensive load capacity, please get it from the forklift factory.

  1. Asennusluokka

The attachment is the mounting bracket of the product on the back of the product. Standard products carry these hooks and require forklift forks to meet international standards to properly mount the connection.

The meaning of installation is as follows:

Forks Carriage

IIIIIIVV
Rated capacity of forklift (kg)1000-25002501-49995000-80008001-10999
yksikkömmmmmmmmmmmmmmmm
b407.0016.02508.0020.00635.0025.00728.0028.66
h (maximum)381.0015.00476.0018.74597.5023.50681.0026.80
h (minimum)380.0014.96474.5019.68595.0023.50678.0026.70

 

  1. Clamp arm& Forks Length

The clamp arm & fork length listed in this product manual is the effective length for the actual operation of clamp arm & fork.

  1. Takuu

Huamai  gives the warranty of new attachments 24 months from the date of delivery to first receiver or 4000 work hours according to the warranty policy listed in the products manuals.

Calculation of Comprehensive Net Capacity

The capacity is an important factor in the model selection for the forklift trucks and the attachments, the overall comprehensive capacity of the forklift truck and the attachment will decline when the forklift install with the attachments because of the below two factors:

  • Part of the capacity moment may be offset by the moment of its self-weight.
  • The load countermove forward because of effective thickness during the actual operation.

The formula below helps to calculate the net capacity. The ultimate value of capacity for reference only.

The counting parameters of forklift

Q: Rated capacity of forklift (kg) (Note: The rated capacity is relevant to the maximum height of lift)

X: The horizontal distance from the center of front wheel to the fork from face (mm)

C: The horizontal distance from the fork shank front face to the load center (mm)

S: The thickness of fork (mm)

The counting parameters of attachments

M: Attachment self-weight (kg)

A(A-X): The horizontal distance from center of front wheel to carriage front face (mm)

HGG: The horizontal distance from front face of carriage to horizontal center of gravity (mm)

ET: The horizontal distance from the carriage front face to the loaded back face (mm)

L: The horizontal distance from the loaded back face to the load center (mm)

Example:

Q= 2500kg   X= 450mm   C=500mm   S= 50mm

M=600kg   A= 400mm    HCG=300mm    ET=200mm

L=500mm

Comprehensive Net capacity (Residual capacity)

The minimum value got from the rated forklift truck load capacity, the attachment load capacity and the comprehensive net capacity as the actual capacity of the forklift trucks and the attachments as one, the weight of the carrying goods shall not exceed this allowable value.

* The accurate comprehensive load capacity value of the forklift truck and the attachments is getting from the forklift factory.

Takuu

Thank you very much for purchasing Huamai attachments. In order to fully understand your rights as our customer, we recommend that you read the content of this warranty carefully.

The following: HM refers to Fujian Huamai Machinery Co., Ltd.; “Buyer” means a direct product purchaser and user.

Huamai Products

Huamai guarantee the products comply with contracts, quotations, relevant performance parameters of the requirements listed in the manual.

Warranty: Huamai new products.

New Products: Warranted for a period of 24 months following date of buyer receiving products, or 4000 working hours since date of installation whichever reaches the first.

Our promise to you

Huamai will repair or replace, at our option, any parts we deem to be defective in materials or workmanship, subject either to our own or Huamai authorized inspection.

Comprehensive net capacity

The calculation of the attachments comprehensive net capacity only for reference. The comprehensive net capacity of the forklift/attachment combination will be submitted by the original forklift manufacturer.

Buyer and User Attention

To preserve Huamai’s Warranty, Buyers and End Users must carefully follow the applicable User Manual when installing, adjusting, maintaining and operating Huamai equipment.

The buyer/end user must the obtain written authorization from Huamai for repairs, other than removal/replacement of defective parts.

Any unauthorized repairs or alterations, use of parts not provided by Huamai, or failure to following Huamai User Manual will result in loss of warranty.

Notice

Huamai does not warrant that its products will perform any particular task where conditions are not suitable for the product.

Huamai assumes no responsibility for loss, damage or injury to persons or property or for consequential damages, resulting from the possession or use of its products.

Huamai Warranty done not cover for general wear and tear, abnormal applications, normal or scheduled maintenance.

There are no warranties either expressed or implied including any warranty of fitness for a particular purpose which extend beyond those stated in this warranty and the product description on the face of Huami order acknowledgement.

Return/Rejection Policy

Please keep the attachments in unused condition. Please note that any actions must firstly adhere to the valid contract or additional agreement issued by Huamai.

Please submit the return permission. All costs and expenses caused are the sole responsibility of the buyer.

Where the following conditions apply, we will refuse returns.

  • Be in used condition.
  • Be not returned in original design.
  • Special designed for customer.
  • Special items mentioned in sales contract or additional agreement.

Thank you for choosing Huamai. If you have any requirements, please feel free to contact us.

FAQ:

1: What kind terms of payment can be accepted?
A: For terms of payment, normally L/C, T/T.

2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, etc.

3: What about the delivery time?
A: 1-15 days after receiving the deposit.

4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.

6. Can I have a sample order?

V: Kyllä, olemme tyytyväisiä näytteen tilaukseen testata ja tarkistaa laatu. Sekoitetut näytteet ovat hyväksyttäviä.

7. Can you accept mixed batch of different products?

V: Kyllä, tuemme erilaisia tuotevalikoiman tukkumyyntiä.

8. Can you provide container packed in wooden cases if I order more products?

A : Yes,we are can provide a set of wooden packaging products.

9. We want to visit your company?

V: Ei hätää, olemme tuotanto- ja jalostusyrityksiä. Odotamme saapumistasi ja johdamme sinut käymään tehtaallamme ja jalostustehtaalla.